 Immersion Heaters WAAGE portable immersion heaters are designed for "over the side" tank heating. Drum Types are specially designed for heating liquids in 55 gallon drums. Used in laboratories, industrial plants and institutions, heaters are sheathed in brass, steel, copper or stainless steel depending on the application. The non-portable type are sturdy "screw-in-units" or flanged units of single or multiple tube design, made especially for commercial and industrial use. 
Non-Portable Immersion HeatersWAAGE non-portable immersion heaters are sturdy, screw-in units of single and multiple tube design. They are heavy duty heaters made especially for commercial use.Construction Coiled nickel-chrome alloy heating elements, centered by hard refractories, are vibro-packed with insulating materials of high thermal conductivity. Sheathing materials are copper for water heating, steel for oil heating, and stainless steel for use in corrosive liquids. Ova; shaped tubes provide minimum distance of heat transfer and permit multi-tube installation in minimum space. All joints and seams are hard soldered, brazed, or welded, then pressure tested against leakage. Standard units are equipped with outlet boxes for making electrical connections. Applications These non-portable, heavy duty immersion heaters are installed through the walls of tanks for heating water, oils, heat transfer mediums, etc.
Drum and Barrel HeatersL-shaped styles, deep tank styles are available.With Thermostat Control WAAGE drum and barrel heaters are designed for rapid heating and melting of thick liquids to facilitate handling in open containers. Standard heaters are 18" in diameter with a 36" riser to fit 55 gallon drums. Construction Drum heaters are constructed with coiled nickel-chrome alloy heating elements. The single tube riser and triple loop heating coil is reinforced to give added stability. the heaters are sheathed in steel or stainless steel depending on the liquids to be heated. They are equipped with automatic thermostat control. Applications WAAGE drum heaters are immersed in the top of an open drum to melt or liquefy grease, paraffin, wax or any other thick or congealed liquid. When used to melt solids, the heater is placed n top of the substance; as melting occurs, the heater settles to the bottom of the drum by gravity. 
Flash Immersion HeatersSafe and EfficientWAAGE Flash Immersion Heaters are designed for quick immersion "over the side" of tanks or vessels. They are portable and ideally suited for applications where it is impractical to install immersion heaters through the sides of tanks. These heaters are used in laboratories, industrial plants, institutions, barber shops, beauty salons, and in the home. Their use for sterilizing and heating liquids to a boil is more efficient than other methods because they make direct contact with the liquid rather than first having to heat a vessel or container. Following are some typical applications which demonstrate the many varied uses of Portable WAAGE Flash Immersion Heaters:
Urn Type HeatersUrn type immersion heaters are designed for installation in coffee urns, steam tables, and other shallow containers. These heaters are of two coil construction suitable for a three heat control switch. They are made to pass through a 3 5/8" diameter hole when the outlet box is removed. The heater element is installed in a 2 7/16" diameter hole in the bottom of the vessel or container. The heater is copper sheathed and has a 4" outlet box with locknut and gasket. UL listed and available in titanium. |
| WAAGE Electric, Inc. Call us today at 1-800-922-4365 to find the WAAGE location or Distributor Nearest you! WAAGE Electric, Inc.
| |
 Web Design If you experience problems with our site, please contact our Webmaster. Copyright 1995-1998 WAAGE Electric, Inc. |